centurion D5 DOSS
D5-Evo and D10 gate operator Doss harness.
Features
- D10 / D5EVO Doss Harness
- V3 V4 Only
PRODUCT INFORMATION
Centurion D5V3 Doss Assembly Only
- D5V3 Doss Assembly Only
What’s in the box:
1 x D5V3 Doss Assembly Only
-24%
Based on 0 reviews
Be the first to review “centurion D5 DOSS”
Content missing
Related products
-
centurion
Centurion D20 smart Industrial Sliding gate controller (GM)
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
TECHNICAL SPECIFICATION
D20 SMART Input voltage 90V – 240V AC +/-10% @ 50Hz1 Current consumption (Mains) 250mA Battery charger current output 1.8A @ 27.4V +/-1% Maximum number of operations per day 750.25 Duty cycle – Mains present (2,3) 45% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah) 3 Current consumption (motor at rated load) 9A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 52kgf Motor push force – rated 39kgf Gate mass – maximum 2000kg Gate length – maximum 25m Gate speed (varies with load) (2,5) Up to 18m/min 3 Manual Override Lockable lever with key release Drive Pinion 13T Module 4 Operations in standby with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) Half day (2, 3, 4) 101 | 55 Full day (2, 3, 4) 80 | 45 Collision Sensing Electronic Operating temperature range -15°C to +50°C Onboard receiver type CENTURION rolling code (Keelog encryption) multichannel Receiver code storage capacity 1500 Remotes 6 Receiver frequency 433.92MHz Degree of protection IP54 Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high - Can operate off a solar supply, consult your local dealer for assistance.
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
SKU: n/a -
centurion
Centurion D20 Smart Turbo Sliding Gate Operator Motor Steel Rack Kit
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
SKU: n/a -
-
centurion
Centurion 4 Meter Rack
Description
4 Meter Black Nylon Raz Rack – joinable 8 x (500mm x 30mm x 25mm)
Gear rack is 0.5M long use sliding gate openers. These gear racks fit to the bottom rail of the gate so that automatic gate opener’s drive gear can mesh, Including Tek Screw Fasteners.
These Raz Racks can be used for all conventional sliding gate motors ie: ET Systems, Gemini, DTS & Centurion as the pinion dimensions are standard.
Mounting holes are slotted for adjustment.
What’s in the box
1x Raz Rack 4m BundleSKU: n/a
There are no reviews yet.