VERT-X Single Swing Gate Motor Kit
- Exceptionally easy system setup via LCD user interface.
- Open-nut drive system and rugged die-cast aluminium construction for reliable operation.
- Supports inward- and outward-opening gates without needing mechanical endstops.
- Automated limit setup for double and single swing gates.
- Fail-safe opto-electronic position and collision detection system ensures maximum safety.
- Advanced closed-loop speed control for safe and reliable operation, even on inc lined gates under windy conditions.
- Multiple operating features including Intruder-detection Alarm Modes (a world first).
- Onboard code-hopping multichannel receiver with selective add and delete.
- Battery backup for uninterrupted operation during power failures.
- Input Voltage: 90 V – 240V AC +/- 10%, 50/60Hz
- Motor Voltage: 12V DC
- Motor Power Supply: Battery-Driven, 1.8A Charger
- Push Force (Max): 250kgf
- Typical Gate Opening Time: 11 Sec
- Duty Cycle (Mains Present): 50%
- Daily Operations (Max): 250
- Maximim Leaf Width for Corresponding Gate Mass (90° Opening):
1.5m = 600kg < 2m = 335kg < 2.5m = 215kg < 3m = 150kg
- Code-Hopping
- Multi-Channel
- 433MHz
- 65 Transmitter Capacity
- 1 x VERT-X Swing Operator (Including Battery)
- 1 x Control Board
- 2 x 4 Button NOVA Transmitter
- Extra Remotes
- Install: We can come and install Slide, Swing and Garage Openers Sydney wide
₦889,700.00 ₦989,700.00
- Exceptionally easy system setup via LCD user interface.
- Open-nut drive system and rugged die-cast aluminium construction for reliable operation.
- Supports inward- and outward-opening gates without needing mechanical endstops.
- Automated limit setup for double and single swing gates.
- Fail-safe opto-electronic position and collision detection system ensures maximum safety.
- Advanced closed-loop speed control for safe and reliable operation, even on inc lined gates under windy conditions.
- Multiple operating features including Intruder-detection Alarm Modes (a world first).
- Onboard code-hopping multichannel receiver with selective add and delete.
- Battery backup for uninterrupted operation during power failures.
- Input Voltage: 90 V – 240V AC +/- 10%, 50/60Hz
- Motor Voltage: 12V DC
- Motor Power Supply: Battery-Driven, 1.8A Charger
- Push Force (Max): 250kgf
- Typical Gate Opening Time: 11 Sec
- Duty Cycle (Mains Present): 50%
- Daily Operations (Max): 250
- Maximim Leaf Width for Corresponding Gate Mass (90° Opening):
1.5m = 600kg < 2m = 335kg < 2.5m = 215kg < 3m = 150kg
- Code-Hopping
- Multi-Channel
- 433MHz
- 65 Transmitter Capacity
- 1 x VERT-X Swing Operator (Including Battery)
- 1 x Control Board
- 2 x 4 Button NOVA Transmitter
Based on 0 reviews
Be the first to review “VERT-X Single Swing Gate Motor Kit”
Content missing
Related products
-
centurion
Centsys i5 i5v3 Infrared Beams Photocells Wired Safety Beams Inductive Loop
features:
i5 infrared beams from CENTURION are simple to align, extremely reliable and boasts an operating range of up to 40m. It can be used on gates, garage doors, and even for simple perimeter protection.
- Wide infrared beam makes for supremely easy beam alignment – no more battling onsite.
- Highly cost-effective detection solution.
- Easy commissioning thanks to LED indicators.
- 40 metre range – suitable for even the widest of entrances.
- Compatible with Intruder-detection Alarm functionality (a world first) – greatly improves security.
- Wide input voltage rang
SKU: n/a -
centurion
40 WATTS SOLAR PANEL
SPECIFICATIONS
Power classes 370W
Module effiency 15.4% to 19%
Dimensions 1956 x 992 x 35 mm
Dimensions 1956 x 992 x 40 mm
Dimensions 1956 x 992 x 45 mm
Weight 21.5 kg
Frame Aluminium hollowchamber
frame on each side
Glass Low-iron and tempered
glass 3.2 mm
Cells 72 pcs monocrystalline
Si-cells (156 x 156 mm)
Cell Embedding EVA
Back-Foil TPT / TPE / BBF
Junction Box TÜV certified
Cable 4 mm² solar cable
2 x 900 mm
Temperature
Range -40°C … +85°C
Load Capacity 5400 Pa (IEC 61215)Monocrystalline solar module
High-quality
With 72 cells and 3 bypass diodes in power classes from 30 to 40 Wp for grid connected systems.Reliable
The high quality level of ERA SOLAR guarantees long life-time and high earnings.Solid
An Aluminium hollow-chamber frame on each side combined with low-iron and tempered solar glass ensures high load capacity resistance.Performance guarantee
ERA SOLAR grants a power guarantee of 90% of nominal power output up to 10 years and 80% up to 25 years.(Lagos, Nigeria)
SKU: n/a -
centurion
Photons – Infrared Gate Safety Beams with Wireless Technology
Photon infrared gate safety beams deliver exceptional performance coupled with wireless technology
Photon has a powerful 30 meter range with its key feature being it powered by 2 x Alkaline AA battery’s on the far side of your driveway from the control box.
The Receiving Beam closest to the control box still requires a 4 core security cable but this is often only a couple meters long and easy to add to an existing installation.So if cables where not previously run under the driveway you can still add Photon Safety Beams with battery changes only needed every 2 years.
SKU: n/a -
centurion
Centurion D20 smart Industrial Sliding gate controller (GM)
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
TECHNICAL SPECIFICATION
D20 SMART Input voltage 90V – 240V AC +/-10% @ 50Hz1 Current consumption (Mains) 250mA Battery charger current output 1.8A @ 27.4V +/-1% Maximum number of operations per day 750.25 Duty cycle – Mains present (2,3) 45% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah) 3 Current consumption (motor at rated load) 9A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 52kgf Motor push force – rated 39kgf Gate mass – maximum 2000kg Gate length – maximum 25m Gate speed (varies with load) (2,5) Up to 18m/min 3 Manual Override Lockable lever with key release Drive Pinion 13T Module 4 Operations in standby with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) Half day (2, 3, 4) 101 | 55 Full day (2, 3, 4) 80 | 45 Collision Sensing Electronic Operating temperature range -15°C to +50°C Onboard receiver type CENTURION rolling code (Keelog encryption) multichannel Receiver code storage capacity 1500 Remotes 6 Receiver frequency 433.92MHz Degree of protection IP54 Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high - Can operate off a solar supply, consult your local dealer for assistance.
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
SKU: n/a
There are no reviews yet.