Technical Data:
Manufacturer / Product: | Ubiquiti Networks / Bullet M2 High Power |
Processor Specs: | Atheros MIPS 24KC, 400MHz |
Memory Information: | 32MB SDRAM, 8MB Flash |
Operating System: | AirOS |
Networking Interface: | 1 x 10/100 BASE-TX (Cat. 5, RJ-45) |
Frequency Band: | 2.4 GHz (Standard) |
Supported WLAN Standards: | IEEE 802.11b: 11 Mbps IEEE 802.11g: 54Mbps IEEE 802.11n: 150Mbps |
Network modes: | Access point, Access Point WDS, Station, Station WDS, Bride Mode, Router Mode |
TX Power: | 28dBm> |
RX Sensitivity: | -min. -97dBm |
TCP/IP Throughput: | 100Mbps+ |
Antenna Connector: | N-male plug (connects directly to antenna) |
max. Power Consumption: | 7 Watt |
Power Method: | Passive Power over Ethernet PoE Injector is not included! |
Power Input: | 12V – 24V |
Appliance: | In- and Outdoor |
Dimensions: | 15.2cm x 3.1cm x 3.7cm |
Weight: | 0.18 kg |
Operating Temperature: | -40°C to +80°C |
Operating Humidity: | 5 to 95% non condensing |
-
- Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
-
- Memory Information: 32MB SDRAM, 8MB Flash
-
- Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
-
- Approvals: FCC Part 15.247, IC RS210, CE
-
- RoHS Compliance: YES
-
- RF Connector: Integrated N-type Male Jack (connects directly to antenna)
-
-
- Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-
- No radio card / host board issues
- No RF cable quality concerns
- No mechanical stability concerns
- No enclosure mounting requirements
There are no reviews yet.