Centurion Solar Regulator
PRODUCT INFORMATION
The Centurion Solar Controller 12/24V 20A is part of the ESOLRPG020V0 series of solar charge controllers that has been designed to be economic, practical, simple and easy to use as well as aesthetically pleasing.
FEATURES OF THE CENTURION SOLAR CHARGE CONTROLLER:
- Battery voltage is measured intuitively thanks to the built-in battery indicator,
- Highly efficient series PWM charging increases battery life-span and makes for optimum performance of the system,
- The system uses an electronic switch – no bulky mechanical switches which are easily damaged,
- LED lights display battery voltage state,
- Automatic correction of charging and discharging parameters extends battery life,
- Reliable protection against overcharging, over discharging, overload and short-circuit,
- Reverse protection for battery,
- USB port provides 5V DC for onsite charging of various electronic devices.
SPECIFICATIONS OF THE CENTURION SOLAR CARGE CONTROLLER 12V/24V 20A:
| Nominal system voltage | 12 / 24VDC |
| Maximum battery voltage to the unit | 32V |
| Rated battery current | 20A |
| Charge circuit voltage drop | ≤0.26V |
| Discharge circuit voltage drop | ≤0.15V |
| Self-consumption | ≤6mA |
| Temperature compensation coefficient (TEMPCO) | -5mV / °C / 2V (ref) |
| Working temperature | -35°C ~+55°C |
| Storage temperature | -35°C ~+80°C |
| Humidity | ≤95% N.C. |
| Enclosure | IP30 |
| Product dimensions | 148mm x 85.6mm x 34.8mm |
| Mounting dimension | 138mm |
| Mounting hole size | Φ4.5 |
| Terminal | 4mm² |
| Product weight | 103g |
| Packaging dimensions | 165mm x 105mm x 50mm |
| Mass of unit packed | 0.25Kg |
| Warranty | 12 months manufacturer’s warranty |
WARNINGS AND LIMITATIONS OF THE CENTURION SOLAR CHARGE CONTROLLER 12V/24V 20A:
- Be very careful when working with batteries. Wear eye protection. Have fresh water available to wash and clean any contact with battery acid,
- Use insulated tools and avoid placing metal objects near the battery,
- Explosive battery gasses may be present during charging. Ensure that there is ventilation to release the gasses.
- Avoid direct sunlight and do not install the Centurion Solar Charge Controller 12/24V 20A in locations where water can enter the unit,
- Loose power connections and/or corroded wires may result in resistive connections that melt wire insulation, burn surrounding materials, or even cause fire. Ensure tight connections and use cable clamps to secure cables and prevent them from swaying in mobile applications,
- Use with Gel, Sealed or Flooded battery only,
- Battery connections may be wired to one battery or a bank of batteries,
- Select the system cables according to .5A / mm2 current density.
WHAT’S IN THE BOX:
1 x Centurion PMW Solar Charge Controller 12/24V 20A
Based on 0 reviews
Be the first to review “Centurion Solar Regulator”
Content missing
Related products
-
centurion
D10 Turbo Smart Kit Sliding Gate
The Centurion D10 Turbo Smart is a legendary high-volume performer for sliding gates up to 1000kg. The D10 Turbo SMART now offers you speed, security, endurance, and reliability, quicker and easier than with any other gate motor in the D10’s class, thanks to SMART technology and wireless connectivity.
Kit Includes:
1 x Centurion D10 Turbo SMART Motor
1 x Base plate
2 x Securi-Prod 12V 7.2AH batteries
2 x Centurion Nova 4 Button remotes
2 x 2 Meters steel rackSKU: n/a -
-
centurion
Photons – Infrared Gate Safety Beams with Wireless Technology
Photon infrared gate safety beams deliver exceptional performance coupled with wireless technology
Photon has a powerful 30 meter range with its key feature being it powered by 2 x Alkaline AA battery’s on the far side of your driveway from the control box.
The Receiving Beam closest to the control box still requires a 4 core security cable but this is often only a couple meters long and easy to add to an existing installation.So if cables where not previously run under the driveway you can still add Photon Safety Beams with battery changes only needed every 2 years.
SKU: n/a -
centurion
Centurion 4 Meter Rack
Description
4 Meter Black Nylon Raz Rack – joinable 8 x (500mm x 30mm x 25mm)
Gear rack is 0.5M long use sliding gate openers. These gear racks fit to the bottom rail of the gate so that automatic gate opener’s drive gear can mesh, Including Tek Screw Fasteners.
These Raz Racks can be used for all conventional sliding gate motors ie: ET Systems, Gemini, DTS & Centurion as the pinion dimensions are standard.
Mounting holes are slotted for adjustment.
What’s in the box
1x Raz Rack 4m BundleSKU: n/a
There are no reviews yet.