Centurion D20 smart Industrial Sliding gate controller (GM)
Taking access control to the next level. D20 smart is a perfect balance between security and safety with easy setup and configuration from your smartphone. D20 Smart provides the best experience for installers and end-users alike with easy access to mounting hardware and optimised cable management for the neatest installation around.
Features
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
Specifications
- Input voltage 90V – 240V AC +/-10% @ 50Hz
- Current consumption (Mains) 250mA
- Battery charger current output 1.8A @ 27.4V +/-1%
- Maximum number of operations per day 750.2, 5
- Duty cycle – Mains present 45%
- Motor voltage 24V DC
- Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah)3
- Current consumption (motor at rated load) 9A
- Input / Output sink currents (Max accessory current draw)
- I/O 1-4 100mA (12/24V)
- I/O 5 and 6 3A (12/24V) 10sec Pulse
- Motor push force – starting 52kgf
- Motor push force – rated 39kgf
- Gate mass – maximum 2000kg
- Gate length – maximum 25m
- Gate speed (varies with load) Up to 18m/min3
- Manual Override Lockable lever with key release
- Drive Pinion 13T Module 4
- Operations in standby with 2x 7.2Ah batteries: Power Saving (15m/min 20kgf) |
- Normal (18m/min 20kgf)
- Half day 101 | 55
- Full day 80 | 45
- Collision Sensing Electronic
- Operating temperature range: -15°C to +50°C
- Onboard receiver type: CENTURION rolling code (Keeloq encryption) multichannel
- Receiver code storage capacity 1500 Remotes6
- Receiver frequency 433.92MHz
- Degree of protection IP54
- Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg
- Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high
Kit Includes
- Operator
- DX Controller
- DX Charger 24V 2A
- 2 x 7.2Ah Batteries
- 4m Steel Rack
- Excludes Remotes and Foundation Plate
There are no reviews yet.