Centurion D5 SMART BASE PLATE
Description
ET Drive 500 Gate Motor Base Plate Kit
- ET Motor Base plate incl. bolts and nuts
Related products
-
centurion
Centurion D20 smart Industrial Sliding gate controller (GM) [TX2][2STEEL RACKS]
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
TECHNICAL SPECIFICATION
D20 SMART Input voltage 90V – 240V AC +/-10% @ 50Hz1 Current consumption (Mains) 250mA Battery charger current output 1.8A @ 27.4V +/-1% Maximum number of operations per day 750.25 Duty cycle – Mains present (2,3) 45% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah) 3 Current consumption (motor at rated load) 9A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 52kgf Motor push force – rated 39kgf Gate mass – maximum 2000kg Gate length – maximum 25m Gate speed (varies with load) (2,5) Up to 18m/min 3 Manual Override Lockable lever with key release Drive Pinion 13T Module 4 Operations in standby with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) Half day (2, 3, 4) 101 | 55 Full day (2, 3, 4) 80 | 45 Collision Sensing Electronic Operating temperature range -15°C to +50°C Onboard receiver type CENTURION rolling code (Keelog encryption) multichannel Receiver code storage capacity 1500 Remotes 6 Receiver frequency 433.92MHz Degree of protection IP54 Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high - Can operate off a solar supply, consult your local dealer for assistance.
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
SKU: n/a -
centurion
VERT-X – DOUBLE LEAF SWING GATE MOTOR
Swing gates with leaves from 1.5m up to 3m.With such striking, rugged good looks, the VERT-X linear swing gate motor for domestic gates is more than just a pretty face. Combining an innovative open-nut drive system, advanced diagnostic capabilities and functionality, rugged die-cast aluminium construction and exceptional aesthetics for a wholly unobtrusive installation, VERT-X is positioned firmly at the apex of swing gate automation.Benefits and features:- Exceptionally easy system setup via LCD user interface.
- Open-nut drive system and rugged die-cast aluminium construction for reliable operation.
- Supports inward- and outward-opening gates without needing mechanical endstops.
- Automated limit setup for double and single swing gates.
- Fail-safe opto-electronic position and collision detection system ensures maximum safety.
- Advanced closed-loop speed control for safe and reliable operation, even on inc lined gates under windy conditions.
- Multiple operating features including Intruder-detection Alarm Modes (a world first).
- Onboard code-hopping multichannel receiver with selective add and delete.
- Battery backup for uninterrupted operation during power failures.
Specifications:- Input Voltage: 90 V – 240V AC +/- 10%, 50/60Hz
- Motor Voltage: 12V DC
- Motor Power Supply: Battery-Driven, 1.8A Charger
- Push Force (Max): 250kgf
- Typical Gate Opening Time: 11 Sec
- Duty Cycle (Mains Present): 50%
- Daily Operations (Max): 250
- Maximim Leaf Width for Corresponding Gate Mass (90° Opening):
1.5m = 600kg < 2m = 335kg < 2.5m = 215kg < 3m = 150kg
Receiver Specifications:- Code-Hopping
- Multi-Channel
- 433MHz
- 65 Transmitter Capacity
Kit Contains:- 2 x VERT-X Swing Operator (Including Battery)
- 1 x Control Board
- 2 x 4 Button NOVA Transmitter
SKU: n/a -
centurion
Centurion D20 Smart Turbo Sliding Gate Operator Motor Steel Rack Kit [TX4] [2STEEL RACKS]
-32%
centurionCenturion D20 Smart Turbo Sliding Gate Operator Motor Steel Rack Kit [TX4] [2STEEL RACKS]
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
SKU: n/a -
centurion
CENTURION D5 EVO GATE AUTOMATION KIT
The Centurion D5 Evo, Full Kit includes:
- D5 EVO motor,
- foundation plate,
- 12v7.2ah Sealed Lead Acid battery,
- 2 x Four-button Nova remotes, and
- 4m gate rack, in either Angle Iron Nylon or Raz Rack.
Perfect starter pack to automate any sliding gate.
The original D5 made a mark for itself being a quick operator opening the gate swiftly when you arrive at your entrance. The D5-Evo is now that little bit faster, opening your average four metre gate in less than 12 seconds, adding even more security and convenience
SKU: n/a
There are no reviews yet.