-16%
centurion
Centurion Gate Motor Battery 12V 7AH
Centurion backup battery 7Ah 12V CP4C2-28W
Specifications:
- Backup battery for Centurion D3, D5 Evo, D10 Smart, D5 Smart gate motors as well as various other gate operators. Voltage: 12V
- Capacity: 7AH
- Battery is commonly used for Alarm Systems, Gate Motors, Electric fence Energizers, etc
- Dimensions: 151mm x 65mm x 93m
- Weight: 2KG
₦50,800.00 ₦60,800.00
Centurion Gate Motor Battery 12V 7Ah
The Centurion Gate Motor Battery 12V 7Ah rechargeable backup battery can help keep your devices powered during power failures and load shedding.
APPLICATIONS
• Gate Motors including sliding and swing gate motors
• Electric Fence energizers
• Computer UPS
• Lighting systems
• Alarm systems
• Battery backup systems such as Securi Prod and SherloTronics
• General purpose electronics
FEATURES
- Rechargeable when flat.
- The battery can be used as a backup power when there are power failures and load shedding.
- Maintenance free. so no maintenance is needed.
- Sealed battery can be placed horizontally when being installed or vertically when being installed.
- CE Approved
SPECIFICATIONS
| Brand | Centurion |
| Technology | Sealed Lead Acid Battery |
| Type | Rechargeable |
| Approval | CE Approved |
| Nominal voltage | 12 Volt |
| Capacity | 7.2 Amp hours |
| Terminal | T1/T2 |
| Dimensions for battery casing | 150mm(L) x 65mm(W) x 95mm(H) |
| Dimensions incl. terminals | 150mm(L) x 65mm(W) x 101mm(H) |
| Battery weight | 2.4Kg |
| Packaging dimensions | 156mm(L) x 70mm(W) x 106mm(H) |
| Mass of unit packed | 2.66kg |
| Warranty | Refer to return policy on batteries |
HANDLING AND STORAGE
• Store in a clean and dry space
• Keep out of direct sunlight
• Keep terminals protected and covered during storage
• Keep out of reach of children and pets
WARNINGS
• Battery must be used for the purpose it was intended to and must be charged regularly with the correct charger to prolong the use of the battery.
WHAT’S IN THE BOX
1 x Centurion Gate Motor Battery 12V 7Ah Battery
Based on 0 reviews
Be the first to review “Centurion Gate Motor Battery 12V 7AH”
Content missing
Related products
-
centurion
Centurion D20 smart Industrial Sliding gate controller (GM)
Description
Main features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times, and ensures pin-point stopping
TECHNICAL SPECIFICATION
D20 SMART Input voltage 90V – 240V AC +/-10% @ 50Hz1 Current consumption (Mains) 250mA Battery charger current output 1.8A @ 27.4V +/-1% Maximum number of operations per day 750.25 Duty cycle – Mains present (2,3) 45% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah) 3 Current consumption (motor at rated load) 9A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 52kgf Motor push force – rated 39kgf Gate mass – maximum 2000kg Gate length – maximum 25m Gate speed (varies with load) (2,5) Up to 18m/min 3 Manual Override Lockable lever with key release Drive Pinion 13T Module 4 Operations in standby with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) Half day (2, 3, 4) 101 | 55 Full day (2, 3, 4) 80 | 45 Collision Sensing Electronic Operating temperature range -15°C to +50°C Onboard receiver type CENTURION rolling code (Keelog encryption) multichannel Receiver code storage capacity 1500 Remotes 6 Receiver frequency 433.92MHz Degree of protection IP54 Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high - Can operate off a solar supply, consult your local dealer for assistance.
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
SKU: n/a -
centurion
Centurion D5 Smart Sliding Gate Machine With Remote Control
The Centurion D5 Smart Gate Motor Kit is a product that is designed to make life easier for those who use it. It has a top speed of 30 meters per minute, and it has a range of up to 100 meters. It also has a number of other features, such as an on-board receiver with 1500 button memory, wireless and effortless setup and configuration, and theft-resistant cage.
Key Features:- 30 meter per minute top speed
- 100 meter range
- 1500 button memory
SKU: n/a -
centurion
D20 SMART sliding gate motor for heavy gates
DESCRIPTION
- Centurion D20 SMART Industrial Sliding Gate Operator Kit (2x Batteries, 4m Steel Rack)
- Model SP20
- Included: Centurion D20 SMART Industrial Sliding Gate Operator, 2x 12V 7.2Ah Batteries, 4m Steel Rack.
- Mobile App Access (Control Gate Operator & Access to In-App Diagnostics and Logs)
- Complement Any Driveway with These Gate Operators’ Sleek Design & Rugged, Yet Modern Cover.
- The D20 SMART Moves Even the Most Massive Gates Like a Featherweight – Moving Smoothly which Ensures a Long & Healthy Lifespan.
- Keeps Track of the Gate Position at All Times & Ensures Pinpoint Stopping with Reliable Hall Effect Technology.
- Make Installation Easy with Easy Access to Mounting Hardware, Backward Compatibility with Existing A10 Base Plates, Optimized Cable Routing & an Accessory Tray.
- Easily Set the Gate Limits, Speed, Automatic Closing & Unique Profiles for Every User.
- Built-In Vibration Sensor Protection Against Movement & Tampering (Option to be Linked to an Alarm)
- Battery Backup System Which Allows Continued Operation During Loadshedding (Batteries Included)
- Store Up To 1500 Individual NOVA Remote Controls – Manage the Remote-Control Database with The Mobile App.
- Gate Speed: Up to 18m/min
- Motor Voltage: 24V DC
- Current Consumption: 9A
- Maximum Gate Mass: 2000Kg
- Maximum Gate Length: 25m
- Manual Override – Lockable with Key Release.
- Operating Temperature: -15°C to +50°C
- Weather Protection: IP54
- Dimensions: 295 x 390 x 233 mm
- 24 Month Standard Warranty.
SKU: n/a -
centurion
Centurion D20 Smart 24V DC Sliding Gate Operator Kit
Description
- Strong enough to move a 2t gate
- Taking intelligence to the next level
- Easy “drop-in” replacement for existing A10 sites
- SMART technology makes the D20 SMART as intelligent as it’s solid
- Smooth and strong
- Alert and agile – highly reliable Hall Effect technology keeps track of the gate position at all times
- Uninterrupted convenience with 24V battery backup
- SMART universal controller – compatible with all CENTURION SMART solutions
- Incl 4 meter Steel Rack and 2 x 12v-7.2Ah SLA Battery’s
SKU: n/a
There are no reviews yet.