Overview

Table 4-28 Basic information about the S110-8P2ST-V2

Item	Details
Description	S110-8P2ST-V2 (810/100/1000BASE-T ports(124W PoE+), 1GE SFP port, 110/100/1000BASE-T port, with 1AC power adapter, fanless)
Part Number	98013167
Model	S110-8P2ST-V2

Components

Figure 4-8 S110-8P2ST-V2 appearance

1	PWR indicator	2	Port indicator
3	Eight GE PoE+ electrical ports	4	One GE electrical port and one GE optical port
5	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. Uplink ports are not isolated or aggregated. Ports 1 to 4 10Mbps: Enable the PoE watchdog function for ports 1 to 4 and set the port rate to 10M.	6	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.
7	Power adapter socket NOTE: Use the power adapter (54 V 2.78 A) delivered with the device.	–	–

Ports

Table 4-29 Ports on the S110-8P2ST-V2

Port

Connector Type

Description

Available Components

10/100/1000BASE-T PoE+ port

RJ45

A 10/100/1000BASE-T PoE+ port sends and receives service data at 10/100/1000 Mbit/s.

PoE is supported.

Ethernet cable

10/100/1000BASE-T port

RJ45

A 10/100/1000BASE-T port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

100/1000BASE-X port

SFP

A 100/1000BASE-X port sends and receives service data at 100/1000 Mbit/s.

Indicators and Buttons

Table 4-30 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Power Supply System

The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The device provides 8 PoE ports. The maximum output power of a PoE port is 30 W, and the maximum PoE output power of the entire device is 124 W.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-31 Technical specifications of the S110-8P2ST-V2

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 35 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 36.5 mm x 210.0 mm x 131.7 mm (1.44 in. x 8.27 in. x 5.19 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	150.0 mm x 270.0 mm x 200.0 mm (5.91 in. x 10.63 in. x 7.87 in.)
Chassis height [U]	0.8 U
Chassis material	PC+ABS
Weight without packaging [kg(lb)]	0.91 kg (2.01 lb)
Weight with packaging [kg(lb)]	1.26 kg (2.78 lb)
Typical power consumption [W]	8.2 W
Typical heat dissipation [BTU/hour]	27.98 BTU/hour
Maximum power consumption [W]	Without PoE: 8.4 W Full PoE load: 142 W (PoE: 124 W)
Maximum heat dissipation [BTU/hour]	Without PoE: 28.66 Full PoE load: 484.52
Static power consumption [W]	2.7 W
MTBF [years]	78.77 years
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	Noise-free (no fans), < 30
Noise at normal temperature (acoustic pressure) [dB(A)]	Noise-free (no fans), < 20
Number of card slots	0
Number of power slots	0
Number of fans modules	0
Working mode	Standard Mode, Port Isolation, Ports 1 to 4: 10 Mbps
MAC address entry	4K
Redundant power supply	Not supported
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	Power adapter
Rated input voltage [V]	Power adapter input: 170 V AC to 240 V AC; 50/60 Hz Power adapter output: 54 V DC
Input voltage range [V]	Power adapter input: 170 V AC to 264 V AC; 47 Hz to 63 Hz
Maximum input current [A]	2.78 A
Memory	–
Flash memory	–
Console port	Not supported
Eth Management port	Not supported
USB	Not supported
RTC	Not supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±4 kV
Power supply surge protection [kV]	±4 kV in differential mode and ±4 kV in common mode
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	None
Heat dissipation mode	Natural heat dissipation
Airflow direction	–
PoE	Supported
Certification	EMC certification Safety certification Manufacturing certification